Oil-impregnated bearing material No.1-H
- TOP
- Technical data
- Oil-impregnated bearing material No.1-H
Low noise
Oil-impregnated bearing material No.1-H
General-purpose copper type bearing material This is a soft material with low noise
Characteristics
This material is equivalent to JIS P4013Z. Because it is soft and works well with the shaft, it is perfect for acoustic applications and cameras and the like, where it is desired to avoid sliding noise from the motor. Further, it is a Cu-Sn type and is effective as a countermeasure for rust, which is a concern in Fe type materials.
Uses
- Camera and acoustic-related motors / Fan motors / Office equipment, such as multifunction printers
- Fishing equipment, such as electric reels
- Vehicle equipment, e.g. washer pumps
Recommended range of use
Photo of inside diameter surface
Constituents
(wt%)
Cu | Sn | Zn | Pb | P | C | Other |
---|---|---|---|---|---|---|
Bal. | 7~10 | - | - | - | - | ≦0.5 |
Load capacity and PV value
Material name | Main constituent | Permissible PV value (MPa・m/min) |
Pmax(MPa) | Vmax(m/min) | Density(g/cm3) | Radial crushing strength(MPa) |
---|---|---|---|---|---|---|
No.1-H | Cu‐Sn | 100 | 2 | 100 | 6.5~7.2 | 150 or greater |